Transportation
Micropile casings and threaded bars were used in low-headroom conditions to be the foundation of a flood wall, built to protect the New York City subway station and rail yards at 148th Street/Lenox Avenue.
Download Case Study
A long-term solution to an increasing transportation issue.
One of the first uses of steel H-piles in place of concrete showcased the versatility and ease of use in the local geologic conditions of Florida.
Emergency roadside repairs using pre-fabricated pipe pocket anchors in H-beam soldier pile wall.
Value-engineered design of sheet pile bridge abutment to help connect remote Alaskan village to a new landfill.
Uniquely designed cold formed sheet pile wall works to help widen PRDOT PR-18 in San Juan, PR
Wide flange beams help keep neighborhoods along the Green Line Extension quiet
Steel piling provided for the widening of a highway connecting Toronto and Barrie, ON
Nucor Skyline fabricated and furnished a soldier pile retaining wall for this DOT project.
Cramped urban setting and limited space highlights an ideal use for H-piles due to their light weight and short lengths.
Large diameter pipe piles are used as foundation for new bridge deck over the Meramec River.
Prime domestic micropile casing sets the foundation on the I-70 Fulton Street Bridge project
Supplied foundation steel for a fast track highway construction project in Kansas
High seismic zone requires low diameter to thickness ratio pipe piles to meet building requirements in Kentucky.
New bridge span utilizing ERW pipe piles brings traffic relief to congested Brooklyn
Bridge piers for the Lewis and Clark bridge use H-piles for stability
Wide flange beams and NZ sheet pile are used for a combination wall around the Coney Island railyard to help protect against flooding.
The North Shore Tunnel Connector project is a light rail transit (LRT) expansion from downtown Pittsburgh to the north side of town. The new extension line will tunnel bore across the Allegheny River and surface at Heinz Field and PNC Park.
Caissons made of rolled and welded steel were custom fabricated to accommodate the anticipated bedrock profile in an environmentally sensitive area.
Light-rail system through downtown Los Angeles utilizes wide flange beams in a multitude of ways
H-pile pier foundations for new flyover in busy central Florida intersection alleviates congestion
Extremely meeting an aggressive schedule for rebuilding major regional train line route after Hurricane Sandy showed that Nucor Skyline was the best resource for steel sheet piles.
A value engineering solution of tied-back steel sheet pile capped with concrete to form abutment and wingwalls was utilized in the creation of the Sprout Brook overpass.
Sheet pile utilized for temporary road access, as well as finished bridge, in Sandbridge, VA.
Provided H-piles for the new North Concourse at Salt Lake International Airport.
HP 18x204 sheet piles were used to help bring the bridge project back on schedule after it was determined that 24” octagonal concrete piles were unable to reach tip design.
Supplied over 40,000 LF of strand tiebacks as part of a light rail extension project
A king pile wall helps to connect Miami neighborhoods with a wider bridge span
An upgrade to an old wooden train trestle brings new routes to the Tacoma, WA area and uses local business to provide steel pipe piles
Nucor Skyline’s spiralweld pipe pile was an ideal choice for the load-bearing construction of bridge piers in unfavorable soil conditions in the Missouri River.
Wide flange beams lend support to a new light rail line in suburban Washington, D.C.
The Wellsburg Bridge, connecting two states across the Ohio River, stands strong on Nucor Skyline’s large diameter drilled shaft casings.
Unique construction method brings two new three lane bridges to growing San Diego area
Customized H-piles with tie-rod pockets proved to be a cost-saving solution for the WSDOT in widening the SR-9 corridor.