Micropile casings and threaded bars were used in low-headroom conditions to be the foundation of a flood wall, built to protect the New York City subway station and rail yards at 148th Street/Lenox Avenue.
Download Case Study
Deep foundations needed for New Jersey’s tallest building near the Jersey City waterfront.
The construction of a new state-of-the-art arena with an aggressive construction timetable.
Micropile were used to secure the foundation of the Breckenridge Gondola which transports passengers to the base of Peak 8 in the Rocky Mountains.
Threaded bar reinforced concrete foundation for large remodel of iconic cathedral.
Cost effective solution: traditional soldier beam and timber lagging walls with multiple levels of tieback anchors.
Value-engineered design of sheet pile bridge abutment to help connect remote Alaskan village to a new landfill.
Skyline provides a geotechnical solution using threaded micropile casings and anchor strands in difficult soil conditions at a wastewater treatment plant in Reading, PA
Soil and rock anchors create much needed slope stabilization for the Holtwood Powerhouse in Pennsylvania
First ever installation of a Removable Load distributive compression Anchor (LDCA) system in the Northeastern United States is a cost-effective solution.
Nucor Skyline fabricated and furnished a soldier pile retaining wall for this DOT project.
Prime domestic micropile casing sets the foundation on the I-70 Fulton Street Bridge project
Z-shaped Hot Rolled Steel Sheet piles were used to create a double wall around a deteriorating existing bin wall to separate the cool water intake from the hot water outlet at the J.H. Campbell Generating Complex on Lake Michigan.
Geotechnical products help an aging masonry dam with stability to meet Pennsylvania Department of Environmental Protection requirements
Reinforced steel bar cages support light towers for the new runway at Boston Logan International airport
Threaded bars caisson cages were built and fully assembled at Nucor Skyline’s Camp Hill location to alleviate extremely tight job site.
New construction in the downtown Wilmington, DE business corridor breathes life into an ailing community
Three floor addition to preexisting parking structure in the San Diego desert showcased hollow bar system from Nucor Skyline.
New ferry terminal in Port Jefferson, NY replaces aging timber and sheet pile with lighter-weight, heavier duty Z-shaped sheet piles from Nucor Skyline.
New sheet pile walls upgrade the Port of Hamilton, Pier 12, and get it ready for service for the next 100 years
Supplied the foundation piles for Queens Plaza Park which is slated to be the tallest residential mixed used high-rise in Queens, NY
Hollow-bar anchors used in pre-construction retention wall save time and money for New Mexico mine company.
Supplied over 40,000 LF of strand tiebacks as part of a light rail extension project
Quick, one-step installation of R51N and T76N hollow bar tiebacks were used for this high-profile, luxury condominium in the heart of Greenwich Village.
An alternating pattern of vertical and battered HP18 piles around the foundation provided the appropriate load capacity and stability requirements of the wind turbine.
Supplied piling for sheet pile bulkhead wall to be built for their water shuttle facility