Case Studies | nucorskyline.com

280 Richards Street

Brooklyn, New York

NZ and SKZ sheet piles are used to keep the flood waters at bay in a warehouse site in Brooklyn, NY.

Download Case Study

America's Cup Village

Bermuda

Open Cell construction of an island to house the 2017 America’s Cup Village.

Download Case Study

Blaine Harbor

Blaine, WA

The Port of Bellingham wanted to replace the crumbling structure at a reasonable cost, increase its wave protection and reduce the marina’s susceptibility to seismic damage, all with minimal intrusion on marine life.

Download Case Study

Boeing Secondary Levee

Kent, WA

I-wall design with reinforced concrete artistic walls provided long-term flood risk reduction.

Download Case Study

Cape Croker

Ontario, Canada

Parallel sheet pile wall utilizing whalers and tiebacks encompass exiting wharf for rehabilitation at the Cape Croker Park in Ontario, Canada.

Download Case Study

City of Unalaska – UMC Dock

Unalaska, Alaska

Fast track supply and installation of a 22-cell sheet pile bulkhead dock at an active container handling facility

Download Case Study

Colman Dock

Seattle, WA

Washington State Ferry terminal gets new upgrade with pipe piles to replace aging timbers.

Download Case Study

Empire Lock Reconstruction

Empire, Louisiana

Nucor Skyline supplied piling to build the new Empire Lock, located on the Mississippi River.

Download Case Study

False Creek Levee

Contra Costa County, CA

Environmentally friendly sheet pile wall provided minimal disruption to the channel bottom and helped avoid erosion.

Download Case Study

Gardner's Basin Back Bay

Atlantic City, NJ

NZ 26 steel bulkhead helps protect wetlands from storm surge

Download Case Study

Haines Borough – Portage Cove Harbor Expansion

Haines, Alaska

Project to expand the Portage Cove Harbor in Alaska

Download Case Study

LPV-146 - Chalmette Loop Levee

St. Bernard Parish, LA

H-pile addition to existing levee brings emergency bypass to Highway 46 and 100 year elevation levels.

Download Case Study

Manalapan Seawall

Palm Beach, FL

Nucor Skyline acted quickly to offer design solutions after Hurricane Sandy damaged existing sea walls on the east coast of Florida, rebuilding with Z-shaped sheet piles to an increased height of 8 feet above the mudline.

Download Case Study

Mantoloking Dune Restoration Project

Mantoloking, NJ

Marine-grade A690 SKZ sheets were used to fabricate a seawall to withstand FEMA’s 100-year storm level requirements.

Download Case Study

Port Jefferson

Long Island, NY

New ferry terminal in Port Jefferson, NY replaces aging timber and sheet pile with lighter-weight, heavier duty Z-shaped sheet piles from Nucor Skyline.

Download Case Study

Port of Baltimore Berth 3

Baltimore, Maryland

Combi-wall bulkhead strengthens Berth 3 and brings another 75 years of life to the Port of Baltimore

Download Case Study

Port of Hamilton Pier 12

Hamilton, ON

New sheet pile walls upgrade the Port of Hamilton, Pier 12, and get it ready for service for the next 100 years

Download Case Study

Port of Manzanillo Port Access Expansion

Colima, Mexico

Barge-mounted equipment helped drive more than 1,100 assembled pairs of PZ 35 sheet piling to a depth of minus 9 meters in the Manzanillo Port Expansion project.

Download Case Study

Port of Tuxpan

Veracruz, México

Versatile Z-shaped sheet piles help the Port of Tuxpan welcome larger ships for the oil industry.

Download Case Study

PortMiami Cruise Terminal

Miami, FL

Three new deep water berths in PortMiami will accommodate the new Oasis class ships for continued growth at the Cruise Capital of the World in Miami, FL.

Download Case Study

Portsmouth Seawall

Portsmouth, VA

One of America’s oldest seaports gets a much needed facelift to the waterfront with a new seawall in Portsmouth, VA

Download Case Study

Puerto Caucedo Expansion

Puerto Caucedo, DR

Pipe-Z combined wall system formed the foundation for a new jetty in the expansion of Puerto Caucedo in the Dominican Republic.

Download Case Study

Revere Dock Wall

Detroit, Michigan

Rehabilitation of the Revere Dock Wall in Detroit was done using Nucor Skyline’s H-piles, NZ sheet pile, pipe piles, and connectors

Download Case Study

Rukert Terminal

Baltimore, MD

A Pipe-Z sheet pile system was used to replace an outdated, wood piling platform that was sliding away from the land. While more than was necessary at the time, this system was built for long-term durability at the Rukert Terminal in Baltimore, MD.

Download Case Study

Tampa Port Berth 213 Extension

Tampa, FL

A Pipe-Z sheet pile wall was used to increase capacity at the Port of Tampa container terminal.

Download Case Study

Twin Dolphin Marina

Bradenton, FL

EPA-friendly Pipe-Z combined wall system allowed marine life to travel in and out of a local Manatee River marina while increasing storm wave protection from 3.5 feet to 5 feet.

Download Case Study

Warren Town Wharf

Warren, RI

Combi-wall driven over existing wharf gives new life to New England waterfront

Download Case Study

Location

Application

Products

Industries

Technical Resources

280 Richards Street

America's Cup Village

Blaine Harbor

Boeing Secondary Levee

Cape Croker

City of Unalaska – UMC Dock

Colman Dock

Empire Lock Reconstruction

False Creek Levee

Gardner's Basin Back Bay

Haines Borough – Portage Cove Harbor Expansion

LPV-146 - Chalmette Loop Levee

Manalapan Seawall

Mantoloking Dune Restoration Project

Port Jefferson

Port of Baltimore Berth 3

Port of Hamilton Pier 12

Port of Manzanillo Port Access Expansion

Port of Tuxpan

PortMiami Cruise Terminal

Portsmouth Seawall

Puerto Caucedo Expansion

Revere Dock Wall

Rukert Terminal

Tampa Port Berth 213 Extension

Twin Dolphin Marina

Warren Town Wharf