Bulkhead & Retaining Walls
Parallel sheet pile wall utilizing whalers and tiebacks encompass exiting wharf for rehabilitation at the Cape Croker Park in Ontario, Canada.
Download Case Study
Fast track supply and installation of a 22-cell sheet pile bulkhead dock at an active container handling facility
Cost effective solution: traditional soldier beam and timber lagging walls with multiple levels of tieback anchors.
Washington State Ferry terminal gets new upgrade with pipe piles to replace aging timbers.
Pipe-Z wall constructed to form a cofferdam for a new fire water intake structure.
Construction of a bulkhead wall for environmental containment along the Buffalo River
Nucor Skyline supplied piling to build the new Empire Lock, located on the Mississippi River.
Uniquely designed cold formed sheet pile wall works to help widen PRDOT PR-18 in San Juan, PR
NZ 26 steel bulkhead helps protect wetlands from storm surge
Nucor Skyline fabricated and furnished a soldier pile retaining wall for this DOT project.
Cold formed SKZ sheet piles protect the boardwalk from storm surge at the Point Pleasant Beach in New Jersey.
Threaded bars caisson cages were built and fully assembled at Nucor Skyline’s Camp Hill location to alleviate extremely tight job site.
Sheet pile sealant creates a water resistant barrier using cold formed sheet piles for a water treatment facility in Washington
New ferry terminal in Port Jefferson, NY replaces aging timber and sheet pile with lighter-weight, heavier duty Z-shaped sheet piles from Nucor Skyline.
Combi-wall bulkhead strengthens Berth 3 and brings another 75 years of life to the Port of Baltimore
New sheet pile walls upgrade the Port of Hamilton, Pier 12, and get it ready for service for the next 100 years
Barge-mounted equipment helped drive more than 1,100 assembled pairs of PZ 35 sheet piling to a depth of minus 9 meters in the Manzanillo Port Expansion project.
Three new deep water berths in PortMiami will accommodate the new Oasis class ships for continued growth at the Cruise Capital of the World in Miami, FL.
One of America’s oldest seaports gets a much needed facelift to the waterfront with a new seawall in Portsmouth, VA
Pipe-Z combined wall system formed the foundation for a new jetty in the expansion of Puerto Caucedo in the Dominican Republic.
Hollow-bar anchors used in pre-construction retention wall save time and money for New Mexico mine company.
Value-added engineering from Nucor Skyline saves time and money on the Racine hydroelectric plant project.
Rehabilitation of the Revere Dock Wall in Detroit was done using Nucor Skyline’s H-piles, NZ sheet pile, pipe piles, and connectors
A Pipe-Z sheet pile system was used to replace an outdated, wood piling platform that was sliding away from the land. While more than was necessary at the time, this system was built for long-term durability at the Rukert Terminal in Baltimore, MD.
A king pile wall helps to connect Miami neighborhoods with a wider bridge span
Nucor Skyline helped with a design-build for emergency repair work
Combi-wall driven over existing wharf gives new life to New England waterfront
Wide flange beams lend support to a new light rail line in suburban Washington, D.C.
Customized H-piles with tie-rod pockets proved to be a cost-saving solution for the WSDOT in widening the SR-9 corridor.
Supplied piling for sheet pile bulkhead wall to be built for their water shuttle facility