Topics

Nucor Skyline Blog

Sep 01, 2025

Port of Bellingham

Nucor Skyline's Longview, WA facility produced over 1,300 tons of spiralweld pipe piles to be used as pier foundations for the new heavy lift wharf on Phase II of the construction at the Port of Bellingham. Once the aging timber and steel piers were removed, the spiralweld pipe piles were driven into place using a combination of vibratory hammer and impact hammers. A new heavy-duty concrete dock structure will be installed over the steel pipe piles.more

Aug 01, 2025

Sacramento Weir

The USACE chose Granite Construction for the majority of the work on the widening of the Sacramento Weir project for increased flood protection. Nucor Skyline supplied over 6,500 tons of pipe piles, each fitted with APF conical points, for the foundation of the new bridge and fish passage structures that were needed on the project.more

Jul 01, 2025

DHS Technical Operations Building

The foundation of the new ICE-Technical Operations Building in San Juan Puerto Rico was prepared with the installation of Nucor Skyline’s ERW 14” OD x .0375” pipe piles. Advantix Engineering used a vibratory hammer to install the 345 tons of pipe piles needed to support the new building construction.more

Jun 01, 2025

Moorings Park at Grande Lakes Bulkhead

Manhattan Road & Bridge worked with Nucor Skyline to construct a new bulkhead and tie rod system for the Moorings Park at Grande Lakes project. Along with our domestically produced NZ 26 sheet piling and waler system, Nucor Skyline worked closely with Taylor Engineering to help design and supply an intricate tie back system that would increase the strength and longevity of the bulkhead.more

May 01, 2025

Naval Support Activity Annapolis

Nucor Skyline 48” OD x 1.00” pipe piles were used by McLean Contracting as mooring dolphins at the timber swing piers constructed to dock the yard patrol craft during reconstruction of the main yard patrol pier.more

12 3 4 5