USA
Micropile casings and threaded bars were used in low-headroom conditions to be the foundation of a flood wall, built to protect the New York City subway station and rail yards at 148th Street/Lenox Avenue.
Download Case Study
Top-down steel sheet pile construction for below-grade parking structure in winter conditions.
NZ and SKZ sheet piles are used to keep the flood waters at bay in a warehouse site in Brooklyn, NY.
Deep foundations needed for New Jersey’s tallest building near the Jersey City waterfront.
The construction of a new state-of-the-art arena with an aggressive construction timetable.
One of the first uses of steel H-piles in place of concrete showcased the versatility and ease of use in the local geologic conditions of Florida.
A design alternative that allowed the client to save time and money.
Emergency roadside repairs using pre-fabricated pipe pocket anchors in H-beam soldier pile wall.
The Port of Bellingham wanted to replace the crumbling structure at a reasonable cost, increase its wave protection and reduce the marina’s susceptibility to seismic damage, all with minimal intrusion on marine life.
I-wall design with reinforced concrete artistic walls provided long-term flood risk reduction.
Micropile were used to secure the foundation of the Breckenridge Gondola which transports passengers to the base of Peak 8 in the Rocky Mountains.
Threaded bar reinforced concrete foundation for large remodel of iconic cathedral.
Successful containment of contaminated materials using Z-shaped sheet piles.
Fast track supply and installation of a 22-cell sheet pile bulkhead dock at an active container handling facility
Cost effective solution: traditional soldier beam and timber lagging walls with multiple levels of tieback anchors.
Nucor Skyline spiralweld pipes helped keep the iconic roofline in downtown Seattle safe during the reconstruction of the Climate Pledge Arena
Washington State Ferry terminal gets new upgrade with pipe piles to replace aging timbers.
New pump station in Salt Lake City utilizes NZ sheet pile with the watertight Larssen interlock to speed construction.
Significant cost and schedule savings found with bottom-up sheet pile solution in a $170 million landmark “village within a city” project
Pipe-Z wall constructed to form a cofferdam for a new fire water intake structure.
Steel sheet pile wall designed to protect oil tanks from catastrophic flooding
Value-engineered design of sheet pile bridge abutment to help connect remote Alaskan village to a new landfill.
Precision timing and coordination between partners culminates in successful project
Construction of a bulkhead wall for environmental containment along the Buffalo River
Nucor Skyline supplied piling to build the new Empire Lock, located on the Mississippi River.
An innovative top-down sheet pile construction allowed for building of the superstructure to begin before excavation of parking structure was complete.
Uniquely designed cold formed sheet pile wall works to help widen PRDOT PR-18 in San Juan, PR
Environmentally friendly sheet pile wall provided minimal disruption to the channel bottom and helped avoid erosion.
Cooling pits designed for tight space in existing steel forging facility.
H-piles supplied for the construction of a new 500,000 square foot manufacturing facility in Detroit
Sheet pile walls combine a temporary earth retention system with a permanent building foundation in an extremely tight footprint for two story below-grade parking.
Skyline provides a geotechnical solution using threaded micropile casings and anchor strands in difficult soil conditions at a wastewater treatment plant in Reading, PA
Sewer lift station uses efficient construction method to save time and money
NZ 26 steel bulkhead helps protect wetlands from storm surge
Wide flange beams help keep neighborhoods along the Green Line Extension quiet
Project to expand the Portage Cove Harbor in Alaska
Design guidance from Nucor Skyline aided in the successful completion of two levels of below-grade parking for the LIRR in the historic town of Oyster Bay.
Zero lot line property utilizes steel sheet piles for permanent walls in below-grade parking structure.
Soil and rock anchors create much needed slope stabilization for the Holtwood Powerhouse in Pennsylvania
Up-down construction using Z-shaped sheet piles and tiebacks proved to be an effective method for a mixed use retail/commercial building with below-grade parking in the Sodo district of Seattle.
First ever installation of a Removable Load distributive compression Anchor (LDCA) system in the Northeastern United States is a cost-effective solution.
Nucor Skyline fabricated and furnished a soldier pile retaining wall for this DOT project.
Cramped urban setting and limited space highlights an ideal use for H-piles due to their light weight and short lengths.
Large diameter pipe piles are used as foundation for new bridge deck over the Meramec River.
Prime domestic micropile casing sets the foundation on the I-70 Fulton Street Bridge project
Cold formed SKZ sheet piles protect the boardwalk from storm surge at the Point Pleasant Beach in New Jersey.
Z-shaped Hot Rolled Steel Sheet piles were used to create a double wall around a deteriorating existing bin wall to separate the cool water intake from the hot water outlet at the J.H. Campbell Generating Complex on Lake Michigan.
Time and money savings were realized with the revolutionary sheet pile application for a three levels of below-grade marking in the mixed use development of the John Ross condo in Portland, OR.
Supplied foundation steel for a fast track highway construction project in Kansas
High seismic zone requires low diameter to thickness ratio pipe piles to meet building requirements in Kentucky.
Using sealed and painted Z-shaped sheet piles as a finished wall for a below-grade parking garage provides a light and watertight solution.
New bridge span utilizing ERW pipe piles brings traffic relief to congested Brooklyn
Geotechnical products help an aging masonry dam with stability to meet Pennsylvania Department of Environmental Protection requirements
Bridge piers for the Lewis and Clark bridge use H-piles for stability
H-pile addition to existing levee brings emergency bypass to Highway 46 and 100 year elevation levels.
Reinforced steel bar cages support light towers for the new runway at Boston Logan International airport
Threaded bars caisson cages were built and fully assembled at Nucor Skyline’s Camp Hill location to alleviate extremely tight job site.
Top-down construction of three levels of below-grade parking allowed for above-grade construction to happen simultaneously, saving time and money on this high-rise condominium project in downtown Los Angeles.
Nucor Skyline acted quickly to offer design solutions after Hurricane Sandy damaged existing sea walls on the east coast of Florida, rebuilding with Z-shaped sheet piles to an increased height of 8 feet above the mudline.
Marine-grade A690 SKZ sheets were used to fabricate a seawall to withstand FEMA’s 100-year storm level requirements.
Underground parking structure with field-welded sheet pile to combat extremely high water-table conditions.
New construction in the downtown Wilmington, DE business corridor breathes life into an ailing community
Wide flange beams and NZ sheet pile are used for a combination wall around the Coney Island railyard to help protect against flooding.
Z-shaped sheet pile and sealant help to provide a watertight seal for a king pile wall at the Newtown Creek Wastewater Treatment Plant in Brooklyn, NY.
The North Shore Tunnel Connector project is a light rail transit (LRT) expansion from downtown Pittsburgh to the north side of town. The new extension line will tunnel bore across the Allegheny River and surface at Heinz Field and PNC Park.
Direct-reduced iron facility needed a loading/unloading dock that could support ocean-going barges on the Mississippi River.
Sheet pile sealant creates a water resistant barrier using cold formed sheet piles for a water treatment facility in Washington
Three floor addition to preexisting parking structure in the San Diego desert showcased hollow bar system from Nucor Skyline.
New ferry terminal in Port Jefferson, NY replaces aging timber and sheet pile with lighter-weight, heavier duty Z-shaped sheet piles from Nucor Skyline.
Combi-wall bulkhead strengthens Berth 3 and brings another 75 years of life to the Port of Baltimore
Three new deep water berths in PortMiami will accommodate the new Oasis class ships for continued growth at the Cruise Capital of the World in Miami, FL.
One of America’s oldest seaports gets a much needed facelift to the waterfront with a new seawall in Portsmouth, VA
Provided H-pile for the new foundation of the expanding Pueblo Convention Center
Light-rail system through downtown Los Angeles utilizes wide flange beams in a multitude of ways
Supplied the foundation piles for Queens Plaza Park which is slated to be the tallest residential mixed used high-rise in Queens, NY
Hollow-bar anchors used in pre-construction retention wall save time and money for New Mexico mine company.
Value-added engineering from Nucor Skyline saves time and money on the Racine hydroelectric plant project.
H-pile pier foundations for new flyover in busy central Florida intersection alleviates congestion
ERW and spiralweld pipe made in the USA allowed tight schedules to be met on a parking garage in Central Florida
Rehabilitation of the Revere Dock Wall in Detroit was done using Nucor Skyline’s H-piles, NZ sheet pile, pipe piles, and connectors
Extremely meeting an aggressive schedule for rebuilding major regional train line route after Hurricane Sandy showed that Nucor Skyline was the best resource for steel sheet piles.
A value engineering solution of tied-back steel sheet pile capped with concrete to form abutment and wingwalls was utilized in the creation of the Sprout Brook overpass.
A Pipe-Z sheet pile system was used to replace an outdated, wood piling platform that was sliding away from the land. While more than was necessary at the time, this system was built for long-term durability at the Rukert Terminal in Baltimore, MD.
Cost-effective, top-down construction of below-grade parking allowed excavation while the building of the superstructure began in the St. Cloud Police Headquarters.
Sheet pile utilized for temporary road access, as well as finished bridge, in Sandbridge, VA.
Provided H-piles for the new North Concourse at Salt Lake International Airport.
Steel sheet pile retaining walls used for coastal flood mitigation at clean power facility
Coated H-Piles make easy work of difficult construction conditions in the Mission Bay District in San Francisco
HP 18x204 sheet piles were used to help bring the bridge project back on schedule after it was determined that 24” octagonal concrete piles were unable to reach tip design.
Supplied over 40,000 LF of strand tiebacks as part of a light rail extension project
A king pile wall helps to connect Miami neighborhoods with a wider bridge span
An upgrade to an old wooden train trestle brings new routes to the Tacoma, WA area and uses local business to provide steel pipe piles
A Pipe-Z sheet pile wall was used to increase capacity at the Port of Tampa container terminal.
Deteriorating road conditions at the Intercity Regional Train in Bloomington, MN called for the installation of two permanent steel sheet pile walls with a concrete cap.
The water-tight Larssen interlocks of these Z-shaped sheet piles, plus applied sealant, keep below-grade parking dry in Seattle.
EPA-friendly Pipe-Z combined wall system allowed marine life to travel in and out of a local Manatee River marina while increasing storm wave protection from 3.5 feet to 5 feet.
Nucor Skyline’s spiralweld pipe pile was an ideal choice for the load-bearing construction of bridge piers in unfavorable soil conditions in the Missouri River.
Construction of a Z-shaped sheet pile seawall in a tourism-rich environment saves upwards of $80 million in storm damage for the City of Virginia Beach after only one hurricane season.
Combi-wall driven over existing wharf gives new life to New England waterfront
Wide flange beams lend support to a new light rail line in suburban Washington, D.C.
The Wellsburg Bridge, connecting two states across the Ohio River, stands strong on Nucor Skyline’s large diameter drilled shaft casings.
Unique construction method brings two new three lane bridges to growing San Diego area
Quick, one-step installation of R51N and T76N hollow bar tiebacks were used for this high-profile, luxury condominium in the heart of Greenwich Village.
An alternating pattern of vertical and battered HP18 piles around the foundation provided the appropriate load capacity and stability requirements of the wind turbine.
Customized H-piles with tie-rod pockets proved to be a cost-saving solution for the WSDOT in widening the SR-9 corridor.
Supplied piling for sheet pile bulkhead wall to be built for their water shuttle facility